HP LASERJET 5200 PAPER JAM GANTI (FUSER FILM)

Deskripsi:

To remove the fuser from an HP LaserJet 5200, first take off the rear door and output bin. Facing the back, unscrew the two machine screws that hold the fuser in place. Using a small flat‑bladed screwdriver, lift the fuser assembly to disengage the detents. Grab the green pressure‑release handles and pull the fuser out of the chassis. The video also notes that the main drive assembly gears and frame are interchangeable between the 5000 and 5100 models, but they use different motors. The author shares a personal experience where a wrong gear assembly caused paper jams and size errors until the motor was swapped.