How to Rebuild a 4L60E Transmission: Complete Overhaul & Tips

Description:

This video provides a step-by-step guide on how to rebuild a 4L60E transmission. **The video demonstrates the process of disassembling, inspecting, and rebuilding a 4L60E transmission**. The video also provides tips on how to select the right parts and tools for the job. The video starts by showing how to remove the transmission from the vehicle. Then, the video shows how to disassemble the transmission and inspect the parts for wear and tear. **The video then shows how to rebuild the transmission, including how to install new frictions, steels, seals, and bearings.** The video also covers how to install the valve body, pump, and torque converter. **Here are some of the key elements of the tasks being performed in the video:** * **Inspection:** The rebuilder carefully inspects all of the transmission's components for wear and tear. This includes inspecting the gears, clutches, bearings, and seals. * **Replacement of Worn Parts:** The rebuilder replaces any worn or damaged parts with new ones. This ensures that the transmission will function properly and reliably. * **Assembly:** The rebuilder carefully assembles the transmission, following the proper procedures and torque specifications. * **Testing:** After the transmission is rebuilt, it is tested to ensure that it is functioning properly. **The video also emphasizes the tooling and procedures being applied. Here are some of the tools and procedures that are highlighted in the video:** * **Snap ring pliers:** These are used to remove and install snap rings. * **Feeler gauges:** These are used to measure clearances between parts. * **Bushings:** These are used to support rotating shafts. * **Sealing rings:** These are used to prevent fluid leaks. * **Assembly lube:** This is used to lubricate parts during assembly. * **Torque wrench:** This is used to tighten bolts to the correct specifications. * **Foot press:** This is used to compress springs and install snap rings. * **Hose clamps:** These are used to install sealing rings. By following the steps outlined in the video, you can rebuild your 4L60E transmission and get it back on the road. On this video we go through the re assembly of a 4L60E Transmission. I tried to make this video shorter for you so I skipped the bushing installation and installing the bolts on the valve body. But you can go to the teardown video for reference on where each bolt goes, since they're different sizes. I will make a follow up video on bushing installation. #4L60E #TransmissionRebuild #TransmissionRepair #DIYTransmission #AutomaticTransmission #GMTransmission #ReverseEngagementDelay #WornFrictions #TransmissionTips #StepByStepGuide #TransmissionParts #4L60EClutch #4L60EPump #4L60EValveBody #4L60ESunshell #TransmissionBand